College of Law

Document Cameras

Rooms: Menard Law- 107, 108 ILJLC- 135, 136, 313, 325

Unfold the camera arm (if not already unfolded).
Push the power button to turn on the camera.
If needed there is a light control switch and image orientation adjustment on the left side of the camera arm.
You can zoom the image by selecting the magnifying glass on the touchscreen of the document camera. A slider will then appear on the screen that can be used to adjust the zoom level.

Step 1: HoverCam document camera closed

Step 1: HoverCam document camera open

Step 2/4: HoverCam power and controls

Step 3: HoverCam light

Rooms: Menard Law 103, 105

Unfold the document camera arm (if not already unfolded).
Push the power button to turn on the camera.
If needed there is a light control switch on the front of the camera arm.
To control zoom use the zoom control knob at the right end of the camera arm.
To focus an image push the Auto Focus button on the right end of the camera arm.

Step 1: SMART document camera closed

Step 1: SMART document camera open

Step 2: SMART document camera power

Step 3/4/5: SMART document camera controls

Rooms: Menard Law 215

Step 1: WolfVision document camera closed

Step 1: WolfVision document camera open

Step 2: WolfVision document camera power

Step 3/4: WolfVision document camera controls

Rooms: Menard Law Courtroom and 104

Raise the camera arm (if not already raised) by pressing the lock switch at the base of the arm and lifting the arm upwards.
Switch the power switch to turn on the camera.
If light is needed push the lamp button. Pushing it repeatedly cycles through the different light modes.
You can zoom the image by pushing the Tele and Wide buttons. Wide zooms out and Tele zooms in.
If the image is still too dark use the Irs buttons to brighten the image. The Open button makes images brighter and the Close button makes them darker.
If the image is blurry push the AF button to auto focus the image.