Contact Us

Telephone Services

Telephone Services
Administration Building
Room 133
875 Perimeter Drive MS 3155
Moscow, ID 83844-3155
Phone: (208) 885-5800
Fax: (208) 885-7539

Email

Basic- Analog Phones

Save Money and add Convenience with your own AT&T Connect Conference Bridge!



If you will have 2 or more participants on your conference bridge, it is less expensive and more convenient to use our AT&T Connect Conference Bridge, than it is to use Basic Conferencing, see Conference Bridge Information or call us at (208) 885-5800 to discuss this option.

The Basic conferencing feature is ONLY available when the call is initiated from the University of Idaho campus in Moscow.

These instructions are for Analog phones only. The majority of telephones used in conference rooms are Analog, including most Polycom conference telephones.

No Charge Conference Bridge – You can place a 3-party or 6 party conference bridge from any phone on campus. There is no charge for bridging capabilities but you are responsible for all long distance charges.


3-Party Conference Call

Includes host and 2 other parties

  1. Lift handset
  2. Key in the number of the first party
  3. Wait for answer and announce that you are setting up a conference call
  4. Press Flash/Link/or Hook switch (this will give you dial tone again, if you do not get dial tone, hit the button a 2nd time)
  5. Key in the number of the 2nd party
  6. Wait for answer and announce that you are setting up a conference call
  7. Press Flash/Link/or Hook switch (this will join all three parties together)


6-Party Conference Call – Analog Phones Only

Includes host and 5 other parties

  1. Lift handset
  2. Key in 181 (key this in once at the beginning of the call)
  3. Key in the number of the first party
  4. Wait for answer and announce that you are setting up a conference call
  5. Press Flash/Link/or Hook switch (this will give you dial tone again, if you do not get dial tone - hit the button a 2nd time)
  6. Key in the number of the 2nd party
  7. Wait for answer and announce that you are setting up a conference call
  8. Press Flash/Link/or Hook switch (this will give you dial tone again, you do not get dial tone - hit the button a 2nd time)
  9. Key in the number of the next party
  10. Wait for answer and announce that you are setting up a conference call
  11. Press Flash/Link/or Hook switch (this will join all parties together)
  12. Repeat last two steps until all remaining parties are on the line.